Colourful Silicon PU Surafces Layer Coating Water-based Courts Sports Surface Flooring Athletic Running Track
Basic Info
Model No.: SQM (04)
Product Description
Waterborne polyurethane topcoat
Construction points: accurate mixing and even thin coating construction
Construction ratio: A: B = 15:1
1. Before use, stir the A component evenly, then pour it into a clean mixing tank, while stirring the A component, slowly add the B component curing agent, and add an appropriate amount of 120 mesh quartz sand according to the site conditions. -20%) and the right amount of water (0-20%), the water must be added after the addition of the curing agent is evenly added!
2. Mix the A and B components for about 3~4 minutes, and require 500-600 rpm, until fully stirred. (It is strictly forbidden to use wooden sticks, artificially stir, and the hands are fast, and it is difficult for one minute. More than 300 rpm, the mixer tip should be clean);
3. If a small dose is used, it must be weighed electronically, strictly in proportion to the ratio, otherwise there will be a phenomenon of poor film strength.
4. When rolling, it is recommended to use sponge roller or high quality flat short hair roller. It is necessary to roll longitudinally and horizontally. It must be continuously constructed. It should not be stopped in the middle. It should be used within 30 minutes. Do not place it for a long time, especially high temperature. Weather, the curing reaction is taking place, the time is too long, the paint will gradually solidify and begin to coagulate, resulting in discoloration of the gel reaction. During construction, we must adhere to the principle of “specialized ingredients, multiple allocations, and continuous supply”;
5. It is recommended that the construction temperature of the topcoat be 15-30 °C, the temperature below 10 degrees is not recommended, and construction below 5 degrees is prohibited. Construction is prohibited on rainy days. The topcoat needs to be stored at 10-30 ° C in the dark and must be used up within 6 months after production.
Construction points: accurate mixing and even thin coating construction
Construction ratio: A: B = 15:1
1. Before use, stir the A component evenly, then pour it into a clean mixing tank, while stirring the A component, slowly add the B component curing agent, and add an appropriate amount of 120 mesh quartz sand according to the site conditions. -20%) and the right amount of water (0-20%), the water must be added after the addition of the curing agent is evenly added!
2. Mix the A and B components for about 3~4 minutes, and require 500-600 rpm, until fully stirred. (It is strictly forbidden to use wooden sticks, artificially stir, and the hands are fast, and it is difficult for one minute. More than 300 rpm, the mixer tip should be clean);
3. If a small dose is used, it must be weighed electronically, strictly in proportion to the ratio, otherwise there will be a phenomenon of poor film strength.
4. When rolling, it is recommended to use sponge roller or high quality flat short hair roller. It is necessary to roll longitudinally and horizontally. It must be continuously constructed. It should not be stopped in the middle. It should be used within 30 minutes. Do not place it for a long time, especially high temperature. Weather, the curing reaction is taking place, the time is too long, the paint will gradually solidify and begin to coagulate, resulting in discoloration of the gel reaction. During construction, we must adhere to the principle of “specialized ingredients, multiple allocations, and continuous supply”;
5. It is recommended that the construction temperature of the topcoat be 15-30 °C, the temperature below 10 degrees is not recommended, and construction below 5 degrees is prohibited. Construction is prohibited on rainy days. The topcoat needs to be stored at 10-30 ° C in the dark and must be used up within 6 months after production.
The company's products have high stability and quality assurance. Due to the differences in individual construction environments and materials selected, it is recommended to conduct field tests before construction to ensure reliability. If you have any questions, please call our company or consult your sales consultant and we will be happy to help you.
Product Categories : Other Plastic Track Series
Hot Products
Fashionable Human Hair 4x4 Silk Top Lace Wig Middle Part Silk Top Lace Front WigGrade 7a virgin mexican human hair extension Wholesale cheap 100 remy human hair extensionChina factory price wigs for bald women wholesale top quality 100 human hair wigs for african americansNew arrival tip hair fashion popular ombre i tip hair extension for cheap wholesale 7a grade i tip hairQuality cheap wholesale color fuchsia europe human hair flat tip extensionsFactory Price Double Drawn Nail Tip Hair Extensions #27 Body Wave U Tip Hair ExtensionsWholesale factory price top quality 100 european remy virgin human hair weft can be dyedHair products For 2016 hot selling indian aunty funmi hair bouncy curlsWholesale 100 percent russian aunty funmi hair bouncy curls top grade 7a funmi human hair2015 new trendy products Aunty fumi malaysian hair wholeslae 8a grade high quality malaysian hair extensionNo tangle no shedding blonde mongolian kinky curly hairHigh Quality Indian Remy Human Hair U Part Wig Yaki Bob Human Hair Wig For Black WomenQingdao factory supply 6a virgin brazilian human hair hand tid silk top full lace wigWholesale cheap 6a real tangle free colored brazilian hair weave2015 New fashion trend peruvian hair bundles online factory direct supply hair peruvian hot sale peruvian hair100% unprocessed brazilian hair #60 color wig wholesale blonde human hair full lace wig new trend blonde wig for white women